Teledyne Linea HS Series User Manual page 109

Display Name Feature
Write
File Operation FileOperationExecute
Execute
File Open Mode FileOpenMode
Read
Write
File Access Buffer FileAccessBuffer
File Access Offset FileAccessOffset
File Access FileAccessLength
Length
File Operation FileOperationStatus
Status
Success Success
Invalid Parameter InvalidParameter
Write Protect WriteProtect
File Not Open FileNotOpen
File Too Big FileTooBig
File Invalid FileInvalid
File Operation FileOperationResult
Result
File Size FileSize
Linea HS Series Camera User's Manual
Description
Write Select the Write operation - executed by FileOperationExecute.
Executes the operation selected by File Operation Selector on
the selected file.
Selects the access mode used to open a file on the device.
Read Select READ only open mode
Write Select WRITE only open mode
Defines the intermediate access buffer that allows the exchange
of data between the device file storage and the application.
Controls the mapping offset between the device file storage and
the file access buffer.
Controls the mapping length between the device file storage
and the file access buffer.
Displays the file operation execution status. (RO).
The last file operation has completed successfully.
An invalid parameter was passed to the last feature called.
Attempt to write to a read-only (factory) file.
The file has not been opened yet.
The file is larger than expected.
The last file operation has completed unsuccessfully because
the selected file is not present in this camera.
For Read or Write operations, the number of successfully
read/written bytes is returned. (RO)
Represents the size of the selected file in bytes.
Appendix A: GenICam Commands • 109
View
Guru
Guru
Guru
Guru
Guru
Guru
Guru
Guru