Installing Your Stove; Getting Ready - Pelpro PP60 Owner's Manual

Installing Your Stove

Installing Your Stove

Getting Ready

Getting Ready
Pro Tip
We highly recommend your Stove and pellet vent pipe be installed by a professional installer. Your
retailer can make recommendations for you.
Installation MUST comply with local, regional, state and national codes and regulations.
Consult insurance carrier, local building inspector, fire officials or authorities having jurisdic-
tion over restrictions, installation inspection and permits.
Placement
Where you place your Stove can significantly affect its performance and safety.
A Your Home Acts Like a Chimney
We recommend that you help your home by:
1. Using a minimum of 5 feet of vertical venting
2. Use the supplied outside air kit
3. Install your Stove on a main floor location
This will:
• Help your Stove breathe
• Minimize smoke leakage in the house
• Enhance performance
Clearance to Combustibles
The space between your Stove and the items in your home
that could burn. Materials such as:
• Wood
B
• Sheet rock (drywall)
• Carpet
WARNING!
Asphyxiation Risk.
DO NOT INSTALL IN A SLEEPING ROOM. Consumes oxygen in the room.
For Canada, the installation must conform to CAN/CSA-B365
6
PelPro Pellet Stove • 7083-801F • 04/21
A
1
3
2
B
D
G
E
pelprostoves.com
Installing Your Stove
Getting Ready (Continued)
Pellet Venting
C
Adding bends in the exhaust path restricts air flow,
reduces performance and provides a collection point for
ash deposits requiring more frequent cleaning.
CAUTION
• Do not connect to any air distribution duct or system
• Do not install a flue damper in the exhaust venting system
of this Stove
• Do not connect this Stove to a chimney flue serving
another Stove
• The structural integrity of the manufactured home floor,
wall and ceiling/roof must be maintained
REQUIRED:
Use only 3" or 4" type "L" or "PL" pellet pipe.
Pro Tip
This Stove can be installed with a 3 to 6 inch (76-152mm) Top Vent Offset Adapter Kit. The 3 to 6
inch (76-152mm) Top Vent Offset Adapter are tested to use 24 gauge single wall flue connector
or Listed double wall flue connector to Class A Listed metal chimneys, or masonry chimneys
meeting International Conference of Building Officials (ICBO) standards for solid fuel Stoves.
Installation Video
Visit pelprostoves.com or scan this code:
pelprostoves.com PelPro Pellet Stove • 7083-801F • 04/21
C
7