Where, When And How - Pelpro PP60 Owner's Manual

Maintaining Your Stove

Where, When and How

Where, When and How
Disposal of Ashes
Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be placed
on a non-combustible floor or on the ground, well away from all combustible materials, pending final disposal. If the
ashes are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed container
until all cinders have been thoroughly cooled.
WARNING!
Disconnect Stove from power supply before servicing
Zone 1 - Firebox
WEEKLY OR AS NEEDED
Fire pot
• Remove the fire pot
• Scrape clean and remove ashes
• Replace fire pot
Firebox
• Remove baffles and vacuum residual ash
• Remove ashes from firebox floor
WARNING!
If using a vacuum to clean Stove, be sure embers are thoroughly cooled to prevent a fire in the
vacuum.
Glass
• Apply ceramic glass cleaner
• Use non-abrasive cloth to remove residue
Door Inspection
• The gasket between the glass and firebox should be inspected periodically to make sure there is a good
seal.
22
PelPro Pellet Stove • 7083-801F • 04/21
Maintaining Your Stove
Zone
1
Zone
3
Zone
2
Zone 2 - Stove Body
pelprostoves.com pelprostoves.com
Pro Tip
The type of fuel you are burning will dictate how often you have to clean your fire pot.
If the fuel you are burning has a high dirt or ash content, it may be necessary to clean the fire
pot more than once a day.
Poor quality fuel will cause clinkers to form in the fire pot. Clinkers are formed when dirt, ash
or a non-burnable substance is heated to 2000 deg. F (1093 deg. C) and becomes glass-like.
Always burn dry fuel. Burning fuel with high moisture content take heat from the fuel and
tends to cool the Stove, robbing heat from your home.
Damp pellet fuel can clog the feed system.
CAUTION!
Handle glass assembly with care and refer to maintenance instructions. When cleaning glass:
• Avoid striking, scratching or slamming glass.
• Do NOT clean glass when hot
• Do NOT use abrasive cleaners
• Do NOT operate with glass cracked, broken or scratched
WARNING!
Glass is 5mm thick high temperature heat resistant ceramic glass.
• DO NOT REPLACE with any other material
• Alternate material may shatter and cause injury
MONTHLY OR AS NEEDED
Convection Blower
• Remove right and left side panel to access and remove
convection blower
• Vacuum any debris from the fan blades and blower
housing
Hopper
• Empty hopper of any pellets
• Vacuum any remaining pellets/debris from the hopper
PelPro Pellet Stove • 7083-801F • 04/21
Zone
1
Zone
3
Zone
2
23