Extreme Networks ExtremeWireless AP460C Installation Manual page 21

Install the Access Point
Figure 6: Wall mounting accessory M5 bolt holes
Note
If you are mounting the access point horizontally, ensure that the ports are facing down to
reduce the chance of water entering the chassis.
Procedure
1. Using the ASM wall accessory as a template, mark and drill four mounting holes on a flat surface.
Figure 7: ASM accessory wall mounting hole markings
2. Attach the ASM accessory to the wall by using four M5 shoulder mounting screws.
3. Insert the M5 shoulder mounting screws into the mounting holes.
Callout
1
Note
The printed arrows on the accessory must be pointing up.
Tip
The best practice is to use screw-in anchors with the mounting screws on a wood surface,
and concrete anchors on a concrete surface.
ExtremeWireless™ AP460C, AP460S6C, and AP460S12C Access Points
Install the Access Point on a Flat Surface
Description
M5 bolt attachment holes
21