Switch Led State Indicators - Extreme Networks ExtremeSwitching Virtual Services Platform 4850GTS Series Installation Manual

Installing the VSP 4000 4850GTS Series
Related links
LED state definitions

Switch LED state indicators

The following table describes the main switch LED state indications provided by LED color and
fluctuation cues.
Note:
Indicator states are applicable to all models of VSP 4000 switches.
Table 16: Switch LED state indicators
Label Color and Status
PWR Green (solid)
Off
Status Green (solid)
Green (blinking)
Amber (solid)
Amber (blinking)
Off
RPS Green (solid)
Green (blinking)
Amber (solid)
Amber (blinking)
Off
August 2018
on page 36
Description
The switch is receiving power either from the primary or
secondary power supply. Normal operation.
The switch is not receiving power and not operating.
• During start-up: The power-on self-test (POST) is complete
and the switch is operating normally.
• After start-up: The switch is running the agent code
successfully.
The switch is loading the agent software code.
The switch encountered an error when running the diagnostic
software.
The switch is booting and running diagnostic software. Normal
activity during boot process.
The switch failed the power-on self-test (POST) or failed to load
the agent code.
The switch is connected to a redundant power supply unit
(RPS) or a secondary external power supply, and is operating
normally.
The switch is connected to a secondary power supply, but the
power input is disconnected.
The power supply in slot 1 or slot 2 was removed after
operating.
The power supply in slot 1 or slot 2 is present, but not supplying
power to the switch.
No power to secondary power supply. The switch is not
connected to an RPS or secondary power supply. The RPS is
not supplying power, or the DC/DC module is not supplying
power..
Installing Virtual Services Platform 4850GTS Series 38