Vsp 4000 Power Supplies; Power Cord Types And Order Codes - Extreme Networks ExtremeSwitching Virtual Services Platform 4850GTS Series Installation Manual

VSP 4000 power supplies

The VSP 4000 supports both AC and DC power supplies. One power supply is installed in the
system.
You can install a redundant power supply to support additional power requirements or to provide
power redundancy.
The following table describes the VSP 4000-compatible AC and DC power supplies and their part
numbers (order codes). All the power supplies are EUED RoHS 5/6 compliant.
Note:
The 300-watt and 1000-watt AC power supplies use the IEC 60320 C16 AC power cord
connector.
Use the order codes to order a replacement for the primary PSU or to order a redundant PSU for
your VSP 4000 system.
Note:
Power cords must be ordered separately. Ensure you order the correct power cord for your
region. For more information, see
Table 2: Power supply order codes
VSP 4000 PSU
300W AC power supply For use in the ERS 4626GTS, 4850GTS, VSP 4850GTS
Stackable 1000W AC
POE+ power supply
1000W AC PoE+
power supply
300W DC power
supply

Power cord types and order codes

To connect AC power to the switch, you need an appropriate AC power cord as described in the
following table.
August 2018
Power cord types and order codes
Usage
and WL8180, WL8180-16L wireless controllers.
For use in 4X00 PWR+.
For use with VSP 4450GTX-HT-PWR+
For use in the VSP 4850GTS-DC, ERS5698TFD, 5650TD,
and 5632FD.
DC connector included.
Installing Virtual Services Platform 4850GTS Series
VSP 4000 power supplies
on page 11.
Part number
(order code)
AL1905A08-E5
AL1905A21–E6
EC4005A03–E6
AL1905005-E5
11