Table of Contents
Advertisement
Installing the VSP 4000 4850GTS Series
Environmental requirement
Warning:
To avoid bodily injury from hazardous electrical shock and current, never remove the top of the
device. No user-serviceable components are inside. For a translation of this statement, see
Translations of safety messages
Airflow direction
Airflow direction in the VSP 4850GTS, the VSP 4850GTS DC, and the VSP 4850GTS-PWR+ is
from left to right (as viewed from the front). Cool air enters the chassis through an air inlet at the left
of the chassis, which cools the device. Warm air exits through the exhaust at the right.
Package contents
The following describes the components that are provided with each switch. If any components are
missing, contact the switch vendor.
1. VSP 4850GTS switch with one power supply installed.
2. Rack-mounting hardware that includes:
• Rack-mount brackets
• Screws to attach brackets to the switch
• Screws to attach the switch to the equipment rack
3. Rubber footpads.
4. Documentation that includes the following:
a. Locating the latest software and product release notes for Virtual Services Platform
4000 Series
b. Virtual Services Platform 4000 Series Regulatory Guide
c. Virtual Services Platform 4850GTS Series Quick Install Guide
d. The China RoHS paper
August 2018
Virtual Services Platform 4000 models
• An adequate power source is within 6 feet (1.83 meters) of the switch.
One 15-amp circuit is required for each power supply.
• At least 2 inches (5.08 centimeters) of clearance on each side of the
switch unit for ventilation.
• Adequate clearance at the front and rear of the switch for access to
cables.
on page 43.
Installing Virtual Services Platform 4850GTS Series
22
Advertisement
Table of Contents
