Maintenance; Maintenance Schedule; Lubrication; Tighten Connections - Graco SaniForce 1040e User Manual

Maintenance

Maintenance
Maintenance Maintenance
To avoid injury from fire, explosion, or electric
shock, all electrical wiring must be done by a
qualified electrician and comply with all local codes
and regulations.

Maintenance Schedule

Schedule
Maintenance Maintenance Schedule
Establish a preventive maintenance schedule
based on the pump's service history. Scheduled
maintenance is especially important to prevent spills
or leakage due to diaphragm failure.

Lubrication

Lubrication Lubrication
The pump is lubricated at the factory. It is designed
to require no further lubrication for the life of the
bearings.
Tighten Tighten

Tighten Connections

Connections Connections
Before each use, check and tighten all pump
clamps and fluid connections before operating the
equipment. Replace worn or damaged parts as
necessary.
42
Clean the Clean Clean the the Graco Graco Motor Graco
Keep the heat sink fins clean at all times. Clean them
using compressed air.
NOTE: Do not use conductive cleaning solvents on
NOTE: NOTE:
the module.
Upgrade Graco Graco Motor
Upgrade Upgrade Graco

Software

Software Software
Use Software Upgrade Kit 17H104 and Programming
Cable Kit 24Y788 to update the Graco Motor Control
software. The kits include instructions and all
necessary parts.
Motor Control Motor Control Control
Motor Control Control
Motor Control
3A3167P