Tele System Facile T2HEVC/01 User Manual page 37

Table of Contents

Advertisement

Available languages

Available languages

3.6.5 USB Update
The receiver's software is upgradeable via USB port via this menu, upon insertion of a USB stick containing the appropriate
software image that the manufacturer will arrange at its discretion if necessary.
WARNING
During a software update, do not interact with the receiver nor pull power: risk of irreversible receiver block!
3.6.6 Automatic Update setting
Function suitable for automatic update configuration of the channel list and the software during standby mode. The
receiver is factory-set to do the upgrade at 4:30 am (4:00 for the software).
Both can be disabled, by acting on parameter In standby mode (On / Off), or moved, by inserting with the numeric keys 0 to
9 on the remote control to a new time (in the format HH: MM) in correspondence with the Time parameter.
3.6.7 Auto Standby
The receiver is equipped with said energy-saving auto-off: past three hours function in operating mode without any
command from the user, the receiver will go to standby automatically. This function is factory preset and is possibly
deactivated or changed by the menu.
3.7 Menu Multimedia
3.7.1 Music - Pictures - Movies
Menu dedicated to the reading of personal media files (refer to par.2.6.4) From a mass memory connected to the USB port
of the same receiver.
3.7.2 Device Information
Information relating to mass storage connected to the USB port
3.7.3 Storage Format
Utility of the USB storage device formatting. Select the partition and confirm (select Format and press OK)
WARNINGS
Formatting will delete all files in the memory device.
During formatting, in order not to damage the memory unit and the receiver, do not turn off the power and wait for
the end of the operation without interacting with the devices.
3.8 NETWORK
3.8.1 Configuration of network
To configure the Internet data network connection, access the Network Configuration menu, then select Configure Set
parameter configuration mode
DHCP : Automatic application of network parameters through DHCP dynamic protocol.
1.
Static IP : Manual setting by the user of network parameters
2.
Finally, apply the changes by pressing the OK button on the "Connect".
3.8.2 Yahoo News
The News application, thanks to the connection to the Internet, provides access to the latest news stories, politics,
economics, world, fun sport.
3.8.3 Weather Forecast
The weather application, thanks to the Internet network connection, provides information on current weather conditions
in some cities.
FACILE T2HEVC / 01
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

21005313

Table of Contents