Summary of Contents for Tele System TS6810 T2 STEALTH
Page 3
Dear Guest, TS6810 T2 STEALTH Thank you for choosing the digital terrestrial receiver T T ELE System model This guide provides information on the operation of the equipment, connections, commands, and care of the device, through which you can deepen your understanding of your new receiver.
Index Installation Section ....................................1 Safety and disposal standards ..............................1 Product description and connections ............................2 Remote control ..................................... 3 1.3.1 Batteries .................................... 3 1.3.2 Buttons and functions on the remote control ........................3 1.3.3 Programming TV buttons ..............................4 1.3.3.1 Changing TV codes ................................
TS6810 T2 STEALTH 1 Installation Section 1.1 Safety and disposal standards For a safe use of the appliance and for your own safety, please read the following recommendation concerning the safety measures. POWER SUPPLY Use the supplied power supply unit and connect the device exclusively to a 230V~ 50Hz mains socket.
TELE System 1.2 Product description and connections DC 5V Input power supply 5V 1.5A, to connect the included power supply which in turn is connected to a 230V~ 50Hz power socket. Power on/off button in standby. HDMI Audio-video output HDMI 1.4a for high definition, dedicated to connecting a display with HDMI interface.
TS6810 T2 STEALTH 1.3 Remote control Knowledge of how to use the remote control is the basis for the use of the receiver and for an easy navigation through the various functions and menus. 1.3.1 Batteries Information and warnings Replace and insert batteries before the first use of the product or when the remote does not properly respond to keystrokes.
TELE System 1.3.3 Programming TV buttons 1.3.3.1 Changing TV codes Default TV codes are in the list attached to these instructions (see A A ppendix A). First identify the brand of the TV you want to control, then follow the steps listed below: 1.
TS6810 T2 STEALTH 1.4 First installation of the receiver Once the receiver has been connected (para. 1.2) and the adapter to the mains socket has been plugged in, the receiver will automatically start up. If this does not happen, turn on the device using the appropriate button q on the remote control.
TELE System 2 Section for simplified use WARNING Before reading this chapter you should have carefully read the previous chapter. To simplify the use of the receiver and the management of several digital channels, there are some Windows and menus accessible by pressing a single button on the remote control (see section 1.3.2).
TS6810 T2 STEALTH 2.5 Audio and subtitle options If the current channel is broadcasted in more than one language and/or contains subtitles, the user can select the audio track and/or the subtitles. Perform the following steps: Press the A A UDIO button or S S UB on the remote control.
TELE System REC & TMS : recording and Timeshift. NOTE Recording is only permitted for TV channels transmitted in without encryptions and not for encrypted TV or radio channels. 2.6.2.3 Timeshift Timeshift is tasked to temporarily record a TV program from the moment the user tunes into the program until the channel is switched, then the TV automatically switches to temporarily record the new channel.
TS6810 T2 STEALTH Duration : Timer duration. Save Cancel Save data entered/changed by pressing the O O K button on the screen (or click to stop inserting/changing the timer). 3 Section for advanced use WARNINGS Changing some parameters of the menu may impair the correct functioning of the receiver itself. Therefore, carefully read through this section of the manual before proceeding with any adjustments.
TELE System Rename Channels Edit Edit To rename a channel, press the B B LUE button ( ) and then the G G REEN button ( ), then type in the new name through the alpha-numeric keys on the remote control and the functions available on screen on the input window. Then press the Y Y ELLOW ( ) to confirm.
TS6810 T2 STEALTH WARNING If the screen is connected via HDMI display problems, connect the receiver via SCART to set a compatible resolution value. Aspect mode 16:9 : aspect ratio of the screen/TV connected to the receiver, eiter , and how the images with a...
TELE System 3.4.8 PVR Memory information Technical consultation and configuration menu of the USB storage device when connected to the receiver. Provides information about space available, as well as: YELLOW button ( Format ): Utility to format the USB memory to FAT32 format.
TS6810 T2 STEALTH 4 Menu map The menu is structured as follows: Main menu -- Media Player ---- PVR ---- Video ---- Music ---- Images -- Edit Channel ---- TV Channel List ---- Radio Channel List ---- Delete All -- Installation...
TELE System 5 Troubleshooting guide SYMPTOM POSSIBLE CAUSE REMEDY The receiver is disconnected from the Check that the receiver is plugged in. mains power supply. The power supply is plugged in but it Make sure the power supply is working.
TS6810 T2 STEALTH SYMPTOM POSSIBLE CAUSE REMEDY USB memory is not formatted properly. Formatting with FAT32 File System. USB memory is not compatible. Try another USB memory. The USB memory is not recognized. The sole USB port is not sufficient to Use any external power supply for the power the memory.
Page 24
DVB-T/T2 HD AVC/HEVC, USB PVR ready TELE System TS6810 T2 STEALTH Declaration of conformity Tele System Digital declares under its sole responsibility that this product meets the essential requirements of the Directives: 2009/125/EC (Energy related Products - ErP) 2011/65/EU (Restriction of the use of certain Hazardous Substances - RoHS)