Tele System Facile T2HEVC/01 User Manual page 27

1.2.2 Rear Panel and Connections
1. RF IN Ant signal.
2. HDMI for high definition, dedicated to the connection of a screen equipped with an HDMI interface.
NOTE
If the display is connected to the receiver via HDMI interface presents difficulty in viewing, connect the receiver via
SCART and adjust video resolution from the Image menu of the receiver itself, respecting the characteristics of the
connected screen.
3. LAN Ethernet input for broadband IP connection
4. TV SCART Analog Audio-Video Output SCART standard resolution for connection to a screen / TV, an alternative to the
HDMI output.
5. DC IN Power supply input for the power supply connection in each room, which in turn is to be connected to an outlet
of 230V ~ 50Hz current.
FACILE T2HEVC / 01
3