Tele System Facile T2HEVC/01 User Manual page 35

3.1.4 Global Volume
If disabled (No) you can set a different volume level for each channel.
3.2 Menu Channels Search
During the first installation automatically scan for available channels is performed. Periodically, during the activation of
new television and radio services or modifications to be broadcasters, it is suggested to reinstall or keep updated the
receiver channel list.
3.2.1 Auto Search
Press OK on this menu item to reinstall or upgrade the entire channel list.
WARNING
By performing the operation of the channel list reinstallation, you will cancel the previous channel list.
3.2.2 Manual search
To access the Manual Search menu, press OK namesake menu item. Select a channel with the ◄ / ► arrow keys (or enter
a frequency), and then point to Start Search and press OK to scan it.
3.2.3 Antenna Power
Enables / disables the 5V output for the connection of portable antennas and / or devices such as line amplifiers, which
require a 5V power supply
3.2.4 FTA
Enable this option to exclude from the search encrypted channels
3.3 Language OSD Menu
The following options are available:
1. Language : language of the menu displayed on the screen (On Screen Display - OSD).
First Audio: main audio language for TV programs
2.
Second audio: secondary audio language for TV programs, to be used in the absence of the main
3.
Subtitles Language: preferred language for subtitles of TV programs.
4.
Teletext Language: Teletext language.
5.
3.4 AV Setting Menu
The AV Setup menu has the following video configurations, to be adjusted in line with the capabilities of the monitor / TV
connected to the receiver:
3.4.1 TV System
Select the TV standard (PAL - NTSC).
3.4.2 Resolution
Setting the video output resolution audio to HDMI digital video.
WARNING
If the screen connected via HDMI are having trouble viewing, connect the receiver via SCART to set an appropriate
resolution value.
3.4.3 Aspect Mode:
Screen Format / TV connected to the receiver, between 16: 9 or 4: 3, and the related image presentation mode having a
different format from the screen:
16: 9 Letter Box:
e.
right and left sides to fill the screen without distorting the original image.
16: 9 Pan & Scan
f.
the upper and lower portions.
4: 3 Letter Box
g.
and below to fill the screen without distorting the original image.
when the video source is transmitted in 4: 3, the receiver will apply two black bars on the
: The 4: 3 image will be adjusted in proportion to the width of the screen, while cutting off
: When the video source is transmitted in 16: 9, the receiver will apply two black bars above
FACILE T2HEVC / 01
11