TS6211 DT Indice Norme di sicurezza ............................. 2 Descrizione del prodotto e collegamenti ..................... 3 Pannello frontale ..........................3 Pannello posteriore e connessioni ....................3 Telecomando............................ 4 2.3.1 Tasti e funzioni del telecomando ..................... 4 Primo avvio del ricevitore ..........................5 Impostazione del ricevitore .........................
TELE System 1 Norme di sicurezza Per un utilizzo sicuro dell’apparecchio, e per la vostra incolumità, vi preghiamo di leggere attentamente i seguenti consigli riguardanti le misure di sicurezza. ALIMENTAZIONE Il ricevitore deve essere collegato esclusivamente ad una presa di corrente da 230 Volt AC, 50Hz.
TELE System 2.3 Telecomando La buona conoscenza del telecomando è la base per poter navigare facilmente all’interno dei vari menu. Le funzioni dei tasti sono molto semplici ed intuitive. ATTENZIONE Assicurarsi che le batterie siano inserite con le polarità corrette all’interno del telecomando. Controllate il verso di inserimento delle stesse aprendo lo sportellino delle batterie posto sul retro e verificando la polarità.
TS6211 DT Primo avvio del ricevitore Una volta terminato il collegamento del ricevitore (par. 2.2) ed inserita la spina dell’alimentazione nella presa di rete, il ricevitore si avvierà automaticamente. Se non dovesse accadere, accendere il ricevitore utilizzando l’apposito tasto ON/ST.BY del pannello frontale o del telecomando. Verrà quindi visualizzato il menu di prima installazione, dove si dovranno confermare/modificare alcuni parametri come descritto di seguito: 1.
TELE System 4.4 Impostazione orario Per accedere a tale funzione, premere il tasto MENU, selezionare il menu Configura e quindi Paese ed Ora. Sono disponibili tre modalità, selezionabili tramite l'opzione Uso GMT: Tramite Paese: il ricevitore si regolerà automaticamente seguendo l’impostazione dell’opzione Paese.
TS6211 DT 6 Guida alla risoluzione dei problemi PROBLEMA POSSIBILI CAUSE COSA FARE ricevitore accende -La spina di alimentazione non è -Controllare che la spina sia inserita (indicatore LED sul pannello frontale inserita nella presa di corrente. correttamente nella presa di corrente. del ricevitore è...
TELE System 7 Caratteristiche tecniche Tipo prodotto Ricevitore digitale terrestre (ETSI EN 300 744) per canali in chiaro Frequenza in ingresso 147÷230 MHz (VHF) / 470÷862 MHz (UHF) Larghezza di banda di canale 6 / 7 / 8 MHz Canali memorizzabili (nr. massimo)
Page 11
TS6211 DT Index Safety regulations ............................2 Product description and connections ......................3 Front panel ............................3 Back panel and connections ......................3 Remote control unit .......................... 4 2.3.1 Remote control buttons and functions..................4 First time installation ........................... 5 Receiver settings............................
TELE System 1 Safety regulations We advise you to read the following advice concerning the safety regulations carefully in order to ensure safe use of the appliance. ELECTRICAL SUPPLY The appliance should only be supplied by a current of 230 Volt AC, 50Hz.
TS6211 DT 2 Product description and connections 2.1 Front panel ON / Stand-by button. 2. LED status indicator: GREEN: ON status / RED: Stand-by status. 3. CHANNEL Next channel button. 4. CNANNEL Previous channel button. 5. IR Infrared sensor for remote control. 2.2 Back panel and connections CAUTION It is good practice to connect the receiver with other appliances (e.g.
TELE System 2.3 Remote control unit Get well acquainted with your remote control and you will find it much easier to navigate through the various menu options. The buttons have very easy, user-friendly functions. CAUTION Make sure that the remote control batteries are inserted in the right direction. Check their polarity on the back of the battery cover.
TS6211 DT First time installation When all the connections on the receiver are ready (section 2.2) and the main lead is plugged in, the receiver will start up automatically. If this does not happen, press the ON button on the front panel of the receiver or on the remote control.
TELE System 4.4 Time setting In the viewing mode usage, press MENU on the remote control to open the main menu. Select Setup and then Region and Time. Three setting options are available under GMT Usage item: By Region: the receiver will automatically set the time according to the selected Region.
TS6211 DT 6 Problem solver PROBLEM POSSIBLE CAUSE REMEDY 1. The receiver does not start (no LED -The mains lead is not plugged in. -Make sure the mains lead is lights up on the front panel) - The mains lead is plugged in but the properly plugged in.
TELE System 7 Technical specifications Product type FTA Digital Terrestrial (ETSI EN 300 744) receiver Input frequency range 174÷230 MHz (VHF) / 470÷862 MHz (UHF) Bandwidth 6 / 7 / 8 MHz Channel memory depth 1000 Front panel Display Menu language...
Page 20
Free To Air Digital Terrestrial Receiver TELE System TS6211DT TELE System TS6211DT Dichiarazione di conformità CE CE conformity declaration Tele System Electronic dichiara sotto la propria Tele System Electronic states that this product responsabilità che questo prodotto soddisfa i requisiti meets basic...