Tele System Facile T2HEVC/01 User Manual page 36

TELE System
4: 3 Pan & Scan
h.
side portions.
3.4.4 Video Effects
Default settings for picture adjustment.
3.4.5 Audio Output
Encoding HDMI digital audio output between Stereo (LPCM Out) and original audio passage as from source (Strength SPDIF
Out) or original audio passage connected with the TV control (BS Out, the digital audio is sent in Stereo if the TV does not
It supports the original format).
3.4.6 Audio description
Enable / disable the function description of the scenes (via compensation Volume AD) you can set the volume level of
description than the volume of the audio track).
3.4.7 HDMI CEC
This item allows you to enable / disable the CEC function of the receiver. If the TV connected via HDMI to the receiver is
compatible with the CEC protocol, and its function is also active on the TV, then it is possible to use the TV remote control
to control some basic functions of the receiver, such as power on / off, channel change and adjustment audio volume.
WARNING
Some TVs implement a custom protocol CEC and / or have limited functionality CEC. CEC can not be guaranteed
compatibility with all TVs.
3.5 Menu Local Time Setting
The controls described below are offered depending on the value assigned to GMT Usage:
By Region
1. : Auto Time Synchronization (Recommended) in line with the information provided by terrestrial digital
channels.
User Define
2. : You will have to define the Daylight Savings Time and Time Zone, that is, the time deviation from the
global standard of Greenwich (Greenwich Mean Time - GMT). For Italy, the difference is +1 hour (GMT + 1).
Off
3. : Time manual adjustment. The user must define the date and time.
3.6 System Menu
3.6.1 System Information
Lists information to the receiver system, particularly the software version in use.
3.6.2 Factory Setting (reset)
The reset function of the receiver factory original configuration is commonly also called Reset. To reset, move the cursor
to Factory Settings and press the OK button, then confirm.
WARNING
By performing this operation, you will lose all user customizations and all loaded channels. It will still retain the last
software version installed.
3.6.3 Timer List
See section 2.7
3.6.4 OSD Settings
The following settings are available:
OSD Timeout : duration of the channel information banner
1.
OSD Transparency : Transparency of the channel information banner
2.
Swotching mode : Choice between black screen and freeze while you switch channels
3.
4. Subtitles Display : Setting to keep active the subtitles
12
: The 16: 9 images are proportionally adapted to the height of the screen, while cutting off the