Table of Contents
Advertisement
3.15 TIMER CONTROL PANEL
The optional Production Timer is controlled by this optional panel.
AUTO
RESET
HOLD
START
STOP
PACIFIC RESEARCH & ENGINEERING
•
AUTO, when engaged (latched down), allows those Stereo Line Input
modules with their timer reset function enabled, to reset and restart the timer
at every module ON (refer to Section 2.9.2 on selecting this function). The
AUTO button illuminates to tally its ON status. When AUTO is disengaged
(button up, tally off) the Timer is manually controlled through the panel
buttons.
•
RESET resets the timer to zero (00:00.0). If the timer is already running, it
continues to run from 00:00.0.
•
HOLD is a momentary function. Pressing HOLD holds the timer display at
the present time count while the running time count continues internally.
Releasing HOLD jumps the display to the running time count.
•
START starts the timer from the displayed stop time.
•
STOP stops the timer displaying the final running time count.
NOTE: The Timer Control Panel schematic is located in Section 8.6.6.
65
BMX SERIES III CONSOLE
REVISION C
Advertisement
Table of Contents
