Table of Contents
Advertisement
2.9.3 Control Room Monitor Module Option Switches
The Control Room Monitor Module has a four-station internal option switch and an Auto-Cue option.
The illustration below provides the location of this switch, and defines its functions. See the following
page for a description of the Auto-Cue option.
Switch S200-1 allows Talkback to be assigned to the console CUE system. The CUE output is dimmed
by 10 dB while Talkback is inserted at unity level.
Switch S200-2 allows the Control Room speakers to be dimmed while the Control Room is receiving
incoming Talkback communication. Note that the Control Room speakers already dim when the
Control Room is talking to another location.
Switch S200-3 allows the Talkback circuitry to be assigned to the Selector Output. The monitor feed
to this direct output will be dimmed by 10 dB while Talkback is inserted at unity level.
PACIFIC RESEARCH & ENGINEERING
S200, Logic Assignment Selector
#
ON (CLOSED): Talkback assigned to CUE.
1
OFF (OPEN): No Talkback to CUE assignment.
ON (CLOSED): Receiving Talkback dims C/R.
2
OFF (OPEN): No dim function.
O
1 2
3 4
N
ON (CLOSED): Talkback assigned to Selector Output.
3
OFF (OPEN): Talkback not assigned to Selector Output.
ON (CLOSED): C/R dim disables receiving Talkback.
4
OFF (OPEN): C/R dim does not disable receiving Talkback.
44
BMX SERIES III CONSOLE
Function
REVISION C
Advertisement
Table of Contents
