Table of Contents
Advertisement
2.8.6 Slate/Talkback/Test Oscillator Remote Control
The Slate/Talkback/Test Oscillator module has remote control circuitry available for both "Producer"
and "External" locations.
PRODUCER INPUT
The "Producer" is usually located somewhere in the Control Room. TALK control inputs route the
Producer's Microphone Input signal to the selected location. The schematic below illustrates the full
remote control capability of this input.
TALK TO STUDIO-1
TALK TO STUDIO-2
TALK TO EXTERNAL
SLATE
LOGIC +12 VDC
LOGIC COMMON
NOTES:
A)
Button switches are momentary-action.
B)
Lamps are 12-14 volt, 80 mA.
C)
When tallies are connected as shown above, switch lamps will be illuminated at all times.
PACIFIC RESEARCH & ENGINEERING
TALK TO
STUDIO-1
3
4
5
8
2
1
TALK TO
STUDIO-2
38
BMX SERIES III CONSOLE
TALK TO
SLATE
EXTERNAL
REVISION C
Advertisement
Table of Contents
