Table of Contents
Advertisement
2.3.2 Meter Panel
Figure 2.4 illustrates the layout of the meter panels for the entire range of BMX III consoles. The
AUXILIARY meters are utilized for metering the AUDITION and UTILITY outputs of the BMX III-
10 and BMX III-14 mainframe sizes, and for metering the UTILITY output of the BMX III-18 and
BMX III-22 mainframe sizes. This is accomplished by means of the Meter Switcher Module, which
can also be used to display the Monaural, Send-1, Send-2 or other desired source levels. The
AUXILIARY meters are also used to meter CUE and SOLO signals.
The built-in electret condenser microphone is used as the Control Room source for Slate and Talkback
operations.
NOTE: Blank filler panels are supplied for any unused clock or timer position.
BMX II I
PACIFIC RESEARCH & ENGINEERING
AUXILIARY
LEFT
BMX II I
PACIFIC RESEARCH & ENGINEERING
AUXILIARY
LEFT
RIGHT
BMX II I
PACIFIC RESEARCH & ENGINEERING
PACIFIC RESEARCH & ENGINEERING
AUXILIARY
CLOCK
LEFT
RIGHT
Talkback Microphone
CLOCK
RIGHT
LEFT
Talkback Microphone
AUDITION
CLOCK
LEFT
RIGHT
Talkback Microphone
FIGURE 2.4 METER PANEL LAYOUT
BMX III-10
BMX III-14
PROGRAM
LEFT
RIGHT
BMX III-18
BMX III-22
PROGRAM
TIMER
RIGHT
BMX III-26
BMX III-30
BMX III-34
PROGRAM
LEFT
RIGHT
11
BMX SERIES III CONSOLE
TIMER
AUDITION
LEFT
RIGHT
UTILITY
TIMER
LEFT
RIGHT
REVISION C
Advertisement
Table of Contents
