Table of Contents
Advertisement
3.6 CONTROL ROOM MONITOR MODULE
PGM
AUD
UTL
0
TALKBACK
0
CUE
S U M
R I G H T
L E F T
S T E R E O
I N P U T
M O D E
0
AUTO
HEADPHONE
0
MONITOR
CONTROL ROOM
PACIFIC RESEARCH & ENGINEERING
•
The 12-station Monitor Input switch selects the monitor source from the
PROGRAM, AUDITION or UTILITY buses, or any one of nine external
sources.
NOTE: Legend strip dimensions are provided in Section 2.1.
•
TALKBACK controls the level of Talkback communication received in the
Control Room via the adjustable Talkback output or the Cue output (when
Talkback is assigned to Cue per Section 2.9.3).
NOTE: The TALKBACK control functions only when the Control Room
is muted.
•
CUE controls the level of the Control Room Cue output.
•
INPUT MODE sets the module's monitor and headphone outputs as follows:
STEREO
Discrete stereo is output.
LEFT
The Left input is routed to both output channels.
RIGHT
The Right input is routed to both output channels.
SUM
Left and Right inputs are summed to both output channels.
•
HEADPHONE controls the output level for the console operator's head-
phone system.
•
When the AUTO button is up, Cue is not routed to the operator's headphones.
With the AUTO button down, and Cue active on any module, the operator's
headphones automatically switch to Cue using the selected Auto-Cue Mode.
Refer to Section 2.9.3 for information on the two Auto-Cue Modes.
•
MONITOR controls the volume of the Control Room monitors.
56
BMX SERIES III CONSOLE
REVISION C
Advertisement
Table of Contents
