Table of Contents
Advertisement
3.10 SEND AND RETURN MODULE
S
1
ON
∞
0
S
2
ON
∞
0
SEND OUTPUTS
P G M
AU D
U T L
OUTPUT
I N
L
R
PAN
S U M
R I G H T
L E F T
S T E R E O
I N P U T
M O D E
∞
0
MIX
ON
SOLO
RETURN
PACIFIC RESEARCH & ENGINEERING
This optional module includes the independent functions for the two Send
Outputs and Monitors and the stereo Return Input.
•
ON controls the individual Send outputs. These buttons may be maintained-
or momentary-action, as set by the setting of internal option switches (see
Section 2.9.5).
•
S (SOLO) routes the individual pre-fader Send mix bus audio to the SOLO
monitoring and metering systems. The two rotary controls independently
adjust the two Send levels.
•
The OUTPUT buttons assign the stereo Return audio to any combination of
the PROGRAM, AUDITION and UTILITY output buses.
•
PAN controls, when the INsert switch is down, the left-right balance of a
stereo Return signal, or the position of a monaural or sum mode signal within
the stereo sound field.
•
The INPUT MODE switch routes the Return audio as follows:
STEREO
LEFT
RIGHT
SUM
•
MIX is a stepless, infinite resolution control for the Return audio.
•
The alternate-action SOLO button routes the stereo Return audio to the
console SOLO monitoring and metering systems. The SOLO button illumi-
nates to tally its ON status.
•
The alternate-action ON button turns the Return audio ON and OFF.
Discrete stereo channel throughput.
Left input is routed to both outputs.
Right input is routed to both outputs.
Left and right inputs are summed to both outputs.
60
BMX SERIES III CONSOLE
REVISION C
Advertisement
Table of Contents
