Table of Contents
Advertisement
3.13 METER SWITCHER MODULE
S O L O
C U E
M E T E R
S W I T C H E R
PACIFIC RESEARCH & ENGINEERING
•
The five-station Meter Source switch selects the Auxiliary meter source. On
26, 30 and 34 input mainframes, all five sources come from the Meter
Switcher Inputs. This allows metering of the monaural and Send buses,
remote modulation readouts, etc. On the smaller mainframes, one or two of
the Meter inputs are used to meter the Utility (UTL) and Audition (AUD)
buses. On the 18 and 22 input mainframes, Input 5 (the bottom input) selects
UTL metering. On the smaller 10 and 14 input mainframes, the two bottom
inputs (Input 4 and 5) are used to meter AUD (Input 4) and UTL (Input 5).
NOTE: Legend strip dimensions are provided in Section 2.1.
•
The SOLO and CUE tallies indicate when either function is engaged
somewhere in the console. While the SOLO or CUE tallies are lit, the Solo
or Cue level is displayed on the Auxiliary meters.
NOTE: SOLO or CUE metering priority is set by an internal option switch
(see Section 2.9.8).
63
BMX SERIES III CONSOLE
REVISION C
Advertisement
Table of Contents
