AT&T Merlin Legend 10BS System Manager's Manual page 126

System Operations
4. At the Integrated Solution III menu, move the cursor to User
Maintenance and press
— The User Maintenance menu appears.
5. At the User Maintenance menu, move the cursor to Voice System
Administration and press
— The Voice System Administration menu appears.
6. Move the cursor to Reports Administration and press
— The Reports Administration menu is displayed.
7. Move the cursor to System Reports and press
— The System Reports menu is displayed.
8. Press
9. Press
10. Press
11. Scroll through the report to view the messages in the event log.
Refer to the procedure Using the Explain Command for information on
how to use the explain command for additional information on a particular
message. Also see Chapter 6 for more details on the information
displayed in this report and how to establish option settings. The format of
the messages in the event log and a listing of the messages is included in
Appendix B: Error Messages .
12. To return to the User Maintenance menu interface, press
repeatedly.
Using the Explain Command
An explain command is available for you to find out the problem specified by an
error message. This command uses the error number to provide you with
information about how to respond to the error message.
To use the explain command, follow these steps:
1. At the Console Login: prompt, type is and press
— If a password has been administered, the system prompts you to
— If no password has been administered, the Status Screen appears,
2. At the Password: prompt, type your password and press
security reasons, your password does not appear on the screen as you
type it in.)
— The Status Screen appears.
5-4
Enter
to display the Event Log Report.
Enter
(CHG-KEYS) to show the alternate keys.
F8
(DISPLAY) to display the report.
F2
enter your password. In this case, proceed to step 2.
proceed to step 3.
.
.
Enter
Enter
Enter
.
Enter
.
(CANCEL)
F6
.
. (For
Enter