Table of Contents
Advertisement
System Messages
404 (TSM_TRAN), MAJOR
TSM: Cannot load script <string> for channel <channel>
TSM failed to load the specified script from disk. This message occurs if TSM
encountered an error while opening or reading the script file.
Reload application software if error persists. Ensure that:
— The assembled script file (.T file) is in directory /vs/trans.
— The assembled script file (.T file) is in the proper format, that is, it is
405 (TSM_NOSLOT), MAJOR
TSM: No Slot Available for Script <string>
Contact your Field Service Representative for assistance.
406 (TSM_NOSCRIPT), MAJOR
TSM: Cannot Find Script <string>; errno = <integer>
TSM failed to open the specified script file. This occurs if the script file does not
exist. The value of the errno indicates the cause of the error.
Ensure that the script file (.T file) is in directory /vs/trans.
Script needs to be assigned.
Look up the value of errno in Intro(2), Introduction to Section 2 in the
Programmer Reference Manual.
407 (TSM_BADSCRIPT), MAJOR
TSM: Script <string> has Bad Format
The format of the script file (.T file) is invalid. This can occur if the file is not the
output of the tas assembler.
Ensure that the script file (.T file) is the output of the tas assembler.
Reload the application software if error persists.
408 (TSM_SCRD), MAJOR
TSM: Read Error on Script <string>
A read error occurred while TSM was reading the script file from disk.
Hang up the telephone and try again several times.
You have UNIX System disk problems. Reboot the system, then reload
the software.
the output produced by the tas assembler.
B-7
Hide quick links:
Advertisement
Table of Contents
