AT&T Merlin Legend 10BS System Manager's Manual page 68

Implementing FAX Attendant
1. From the IS-III Main Menu, move the cursor to AUDIX Voice
Power/FAX Attendant (AVP/FA) and press
2. At the AUDIX Voice Power/FAX Attendant menu, move the cursor to
Subscriber Administration and press
— The Subscriber Administration form appears.
3. Press
(DB-MGMT) to display the option menu.
4. Use
5. Press
Printing the Subscriber Database
If you have a printer connected to your system, you can print a list of the current
subscriber database. Use this printout when you are administering the system.
Whenever you add a subscriber, remove a subscriber, or change subscriber
information, print the new subscriber list for your records. To print the subscriber
database, perform the following steps:
1. Make sure the printer is connected to your computer and turned on.
2. From the IS-III Main Menu, move the cursor to AUDIX Voice
Power/FAX Attendant (AVP/FA) and press
3. At the AUDIX Voice Power/FAX Attendant menu, move the cursor to
Subscriber Administration and press
— The Subscriber Administration form appears.
4. Press
(DB-MGMT) to display the options menu.
5. Use
6. Press
Service Administrator Registration
FAX Attendant gives you the ability to customize the voice prompts for your
system. To prevent unauthorized modification of voice prompts, you must
register an administrator for each service. The data is compiled on Form G from
the AT&T AUDIX Voice Power
Implementation document.
Each Service Administrator must be registered with AUDIX Voice Power/FAX
Attendant as a subscriber prior to being assigned as a Service Administrator so
that the system can identify them as authorized to make changes.
NOTE:
You must first register all the service administrators before any subscriber
or outside caller uses your FAX Attendant system. Otherwise, the system
will not function properly. For example, if you do not register the service
3-32
(CHG-KEYS) to display the alternate key labels, then press
F8
or to highlight the Display option.
to select the highlighted option.
Enter
(CHG-KEYS) to display the alternate key labels, then press
F8
or to highlight the Print option.
to select the highlighted option.
Enter
TM
/FAX Attendant System
.
Enter
.
Enter
.
Enter
.
Enter
TM
Planning and
F3
F3