Report Generation
Accessing System Reports
The only System Report currently available is the Event Log Report. To access
this report, perform the following steps:
1. Select System Reports from the Reports menu, and press
— The System Reports menu appears.
HELP
Figure 6-3. System Reports Menu
2. Press
— The Event Log Report appears.
3. Press
(DISPLAY) to view the Event Log Report.
4. Since the report consists of more than one page, press
(CHG-KEYS) to display the alternate keyset and use
and
5. Press
6. Press
7. Press
6-8
System Reports
Event Log Report
>
PREV-FRM
Enter
(CHG-KEYS) to display the alternate keyset and then press
F8
(NEXTPAGE) to view the entire report.
F3
to view the most recent records.
End
(CANCEL) to return to the System Reports menu.
F6
(CANCEL) to return to the Reports menu.
F6
NEXT-FRM CANCEL
CMD-MENU
FRM-MGMT
F8
F2
.
Enter
CHG-KEYS
CHG-KEYS
F2
(PREVPAGE)
Need help?
Do you have a question about the Merlin Legend 10BS and is the answer not in the manual?