AT&T Merlin Legend 10BS System Manager's Manual page 129

System Operations
NOTE:
If you stop the voice system, wait at least 30 seconds for all processes to
complete before restarting it.
To start the voice system, perform the following steps:
1. At the Configuration Management menu, move the cursor to System
Control and press
— The System Control menu appears.
2. At the System Control menu, move the cursor to Start Voice System
and press
— The voice system starts. A number of messages will appear on the
3. When prompted, press
Stopping the Voice System
There are specific steps you should follow to stop the voice system in order to
properly save any administered information and to avoid cutting off calls in
progress.
To stop the voice system, follow these steps:
1. At the Configuration Management menu, move the cursor to System
Control and press
— The System Control menu appears.
2. At the System Control menu, move the cursor to Stop Voice System
and press
— The Specify Wait Time form appears.
3. If the default of 180 seconds for graceful shutdown is unacceptable, enter
a new number of seconds from 60 to 600.
4. Press
— The system will stop answering calls immediately, but will allow the
5. When prompted, press
6. Press
.
Enter
.
Enter
screen. If there are any problems with the Fax Mail database, a
message will display telling you to examine the Most Recent Audit
report. (See Chapter 6, Report Generation, for instructions on how
to examine reports.)
Enter
.
Enter
.
Enter
(SAVE).
F3
specified amount of wait time for completion of calls already in
progress. A number of messages will appear on the screen.
Enter
(CANCEL) to return to the System Control menu.
F6
to return to the System Control menu.
to continue.
5-7