Emerson Micro Motion 5700 Installation Manual page 16

Mounting and sensor wiring
February 2020
• Prepare the 9-wire cable as described in the Micro Motion 9-Wire Flowmeter Cable
Preparation and Installation Guide.
• Connect the cable to the sensor-mounted core processor or junction box as described
in the sensor documentation. You can access all product documentation on the
documentation DVD shipped with the product or at www.emerson.com.
Procedure
1. Remove the transmitter-to-sensor wiring compartment cover to reveal the terminal
2. Feed the sensor wiring cable into the transmitter wiring compartment.
3. Connect the sensor wires to the appropriate terminals.
16
connections.
Figure 3-8: Removal of the transmitter-to-sensor wiring compartment cover
Figure 3-9: Sensor wiring feedthrough
Micro Motion 5700 transmitters for F
Installation Manual
MMI-20029969
Fieldbus
OUNDATION