Wiring For Nonhazardous Installations - Emerson Micro Motion 5700 Installation Manual

Wiring the channels
February 2020
4.5

Wiring for nonhazardous installations

Follow these procedures for explosion-proof, nonincendive, or nonhazardous installations.
4.5.1 Wire the mA output for nonhazardous installations
Prerequisites
Important
Meter installation and wiring should be performed only by suitably-trained personnel
using the appropriate government and corporate safety standards.
Procedure
Wire to the appropriate output terminal and pins.
Figure 4-4: mA output wiring
A
A. mA output
B. Channel B
C. 10–30 VDC (maximum)
D. Loop resistor
E. Measurement device
Related information
mA Output loop resistance
26
B
Micro Motion 5700 transmitters for F
Installation Manual
MMI-20029969
C
D
E
Fieldbus
OUNDATION