Table of Contents
Advertisement
•
Between the water mains and the water inlet pipe of the appliance, there must be a tap to stop the water flow if necessary (2 - Pict. 1)
Water mains pressure must be within the range of
•
The appliance is supplied without a plug. It is supposed to be directly connected to the power supply and therefore, it is necessary to t a
•
multi-pole power switch with a switch-contact gap of at least 3 mm or morebeforehand, according to the regulations in force (
•
The drain pipe of the appliance must be directly connected to a suitable open drain siphon, previously installed by the customer
Do not fit the drain pipe into basins or buckets placed under the counter as this will increase the possibility of forming dirt deposits
and as a result, the spread of bacteria.
Attention!
!
The appliance is supplied without water in the boiler. This is to prevent serious damage if the appliance is exposed to low
temperatures. The appliance must only be supplied with cold drinking water.
.
VI
If this requirement is not met, please consult the manufacturer.
1 and 5 bar.
1 - Pict. 1)
(3
- Fig. 1).
EN LSC 050 06-2020
Advertisement
Table of Contents
