Table of Contents
Advertisement
2. LABELS AND WARNING PLATES
In the picture here below we are showing the labels and warning technical data plates applied on the machine.
Attention!
!
Dedicate all the time necessary to get familiar with these labels/plates. Make sure that they are all readable and for this purpose
clean or replace those which are damaged or not readeable (both in the text and in the graphics). To clean the labels or data plates
use a soft towel, water and soap. Do not use solvents, gasoline, etc.. If a label is applied on a component to be replaced, make
sure that on the new component there is a new label or apply the old label to the new component.
8
EN LSC 050 06-2020
Advertisement
Table of Contents
