Selecting Call Appearances; Changing The Volume; Server Administered Features - Avaya 4690IP User Manual

Changing the Volume

Selecting Call Appearances

The 4690 IP Conference Telephone supports up to three call appearances, with
one line of display reserved for each call appearance.
To select a call appearance, use the "up" and "down" arrow keys to highlight the
call appearance you want, and then press the Select button.
This procedure is used to:
Answer a call when there is an existing active call.
■
Retrieve a call from hold.
■
Start calls on specific call appearances.
■
From an idle display, the first call appearance can be selected by pressing the
Switchhook button.
Changing the Volume
Ringer Volume - to adjust ringer volume, press the Volume Up/Down
■
buttons while in an idle state until the desired volume is reached.
Speaker Volume - to adjust speaker volume, press the Volume Up/Down
■
buttons while in an active call until the desired volume is reached.

Server Administered Features

Other features, such as "Do Not Disturb," are provided by the server.
These features, if available, are listed when you press the Select button from the
idle display or during a call.
To activate or deactivate the features, use the up/down arrow keys to highlight the
option, then press the Select button to select it.
NOTE:
The features available to you depend on how your system administrator
configures the server.
16
Issue 3 October 2007