Drive Motor - Motor Switch - ALLIANCE BD3NGBGS303EW01 Original Instructions Manual

Drive Motor - Motor Switch

Refer to Internal Wiring of Dryer Motor Switch for wiring schematic.
Disconnect electric power to dryer before performing any of the following steps or when replacing inoperative
motor switch.
NOTE: Disconnect terminal 5 wire (yellow or copper) from motor switch before testing start terminals.
NOTE: Reconnect terminal 5 wire (yellow or copper) to motor switch before testing run terminals.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
WARNING
55
Test Procedures
W290
Part No. D515519R3