probst SG-80-PGL2 Operating Instructions Manual page 51

Operation
•
Before any further initial operation the complete assembly group (Ill. B +C) have to be checked for sign
of wears (damages).
•
If damages are noted, the complete assembly group (Ill. B + C) have to be exchanged!!!
•
In addition a function test of the rotation break must be done (see Ill. F, G, H). If necessary exchanged
the rotation break.
The operation of the device (SG) with a damaged / broken limiting chain is strictly forbidden!
Danger to life!!!
A1
2
2
A2
5310.0380
Ill. A
Mount the spare part limiting chain (2) as shown in Ill. A.
and Ill. C. The Ill. D shows the scissor grab with stressed
limiting chain.
Complete assembly see spare parts list.
1
V10
Ill. B
21 / 26
GB