Adjusting The Recline Angle Without The Base - CYBEX ATON 2 Owner's Manual

Hide thumbs Also See for ATON 2:
Table of Contents

Advertisement

Available languages

Available languages

It's very important for your child's safety that this child restraint be installed
at the correct angle.
DO NOT use this or any other child restraint with a premature, low birth
weight, or medically fragile infant, until after you have consulted with
your doctor. Some infants may have dif culty breathing or have other
medical problems when placed in a seated position.
If the child restraint is TOO UPRIGHT, the child's head may fall forward
and cause breathing problems. If the child restraint is TOO RECLINED
crash protection will be reduced.
FAILURE TO properly recline the child restraint on the vehicle seat
increases the risk of DEATH or SERIOUS INJURY.
Adjust Recline
Adjust the seat angle until the
RED
with the ground.
If you are having trouble achieving the proper recline angle:
1. Uninstall Infant Carrier.
2. Place a tightly rolled towel or pool noodle under the Infant Carrier,
where indicated. If on an aircraft, a tightly rolled airline blanket
may be placed under the Infant Carrier to adjust the angle.
3. Continue installation.

Adjusting the Recline Angle without the Base

Level Line on the Infant Carrier is level
Line MUST be level
with ground when
installed without
Base
Line MUST be level
with ground when
installed without
Base
39

Advertisement

Chapters

Table of Contents
loading

Table of Contents