Husqvarna T 4000 Petrol Workshop Manual page 20

a) Push the shims (D) into the space between the
engine mounting plate and engine holders.
D
b) Tighten the 4 bolts (E).
5. To close the air gap at the magnetic clutch, do these
steps:
a) Loosen the 3 bolts that hold the mounting plates
together to make space between the mounting
plates.
20 - Repair and servicing
b) Push the 3 shims into the space between the
mounting plates in the clutch. The slot on the
shim must align with the bolt.
E
c) Use threadlocker Loctite 243 (F) on the 3
loosened bolts.
d) Tighten the 3 bolts (G).
6. Do a check of the distance.
6.6.4 To remove the spark plug
1. Disconnect the spark plug cap.
2. Remove dirt from the spark plug area.
F
WARNING: Let the spark plug become cool
before you remove it.
CAUTION: Make sure that the spark plug has
the correct distance and that it is clean from
deposits.
G
1331 - 001 -