Lesen Sie die Bedienungsanweisung sorgfältig durch und machen Sie sich mit dem Inhalt vertraut, bevor Sie das Gerät benutzen. GB ES DE FR Manuel d’utilisation Lire attentivement et bien assimiler le manuel d’utilisation avant d’utiliser la machine. HUSQVARNA CONSTRUCTION PRODUCTS...
Key to symbols Key to symbols The symbols below are used on the machine and in this Operator’s Manual. It is important that the user under- stands the signiﬁ cance of these in order to work with the machine safely. Please read the operator’s manual Inspection and/or maintenance should carefully and make sure you under-...
This manual covers the Husqvarna DC 3300 dust col- lector/ vacuum unit. It is extremely important all users be familiar with the contents of this manual before com- mencing operation of either machine.
What is what What is what 7. Elastic strap 1. Vacuum motor housing & secondary ﬁ lter housing 8. Collection cone 2. Large toggle latch 9. Filter shaker motor 3. Inlet/hose attachment 10. Primary ﬁ lter housing 4. Dust collection bag 11.
What is what Diagram 1 Diagram 3 1. Filter sock platform 2. Filter sock platform rubber seal 3. Filter coil/spring 1. Rear handle 4. Filter sock 2. Filter shaker motor 3. Filter shaker control 4. Power outlet (USA only) 5. Control box 6.
What is what Diagram 5 Dust ﬂ ap closed Diagram 5 Diagram 6 Dust ﬂ ap open Collection cone Spring Diagram 6 Diagram 7 Collection cone Dust ﬂ ap open Diagram 7 Diagram 8 1. Filter sock rack 2. Attachment nut 3.
What is what Diagram 9 Filter sock platform Filter seal - inner Diagram 9 Diagram 10 1. Primary ﬁ lter (sock) 2. Filter seal - outer 3. Filter clamp Diagram 10 Control Box The control system consists of two switches: 1.
Operation (dry use) Operation (dry use) Changing the dust bags. Once the dust bag has collected around 20 kg of dust, to avoid lifting hazards caused by overﬁ lling of dust bags, the dust bag should be changed. 1. Clear the primary ﬁ lters of dust as outlined previ ously and agitate bag so that dust settles in the bot Setting up tom of the bag.
Operation (wet use) Operation (wet use) The Husqvarna DC 3300 can also be used for collec- tion of wet materials such as slurry formed from the wet grinding process. In order to use the machine for wet collection, simply remove the Primary Filter Socks from the unit.
Troubleshooting Troubleshooting Whilst every measure has been undertaken by the manufacturer to ensure smooth reliable operation of the machine, sometimes problems can arise. The following possible problems may arise: 1. The machine will not run. Ensure power connected to machine is on. If machine still will not run, remove cover from control box and test for presence of power supply at stop/ run switch.
Maintenance Maintenance The following maintenance steps should be followed to maximise optimal performance and reliability of the machine: Daily Inspection of Micro Filters It is highly recommended that operators check dust levels between the ﬁ lter sock platform and secondary ﬁ...
Husqvarna Construction Products, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibil- ity that the Husqvarna DC3300 dating from 2007 serial numbers and onwards (the year is clearly stated on the rating plate, followed by the serial number), complies with the requirements of the COUNCILíS DIRECTIVE: - of June 22, 1998 ”relating to machinery”...