Husqvarna T 4000 Petrol Workshop Manual page 22

3. Loosen the 4 screws and remove the top guard from
the opposite side of the product.
4. Loosen the 5 screws and remove the front guard.
5. Remove the engine. Refer to
the engine on page 13 .
6. Remove the HEPA filter. Refer to
HEPA filter on page 12 .
7. Remove the battery. Refer to
the battery on page 7 .
22 - Repair and servicing
To remove and install
To replace the
To remove and install
8. Disconnect the cables from the quick connector.
9. Remove the 4 screws from the bottom of the HEPA
filter container.
10. Remove the 4 screws behind the container at the
front of the product.
1331 - 001 -