Husqvarna T 4000 Petrol Workshop Manual page 16

7. Install the engine holders on the new engine.
8. Install the top clutch on the new engine and tighten
the 3 set screws.
9. Put the new engine on the product.
16 - Repair and servicing
10. Install the oil drain hose on the new engine.
11. Loosen the 3 set screws in the top clutch and lower
the top clutch to the lower clutch.
12. Tighten the 3 set screws.
13. Make sure that the top clutch is aligned with the
lower clutch. The distance between the top clutch
and the lower clutch side to side must not be more
than 0.039 in./0.1 mm.
14. Make new holes in the engine shaft for the set
screws. Do these steps for each hole:
1331 - 001 -