To Remove And Install The Ignition Key; To Remove And Install The Battery - Husqvarna T 4000 Petrol Workshop Manual

4.3 To remove and install the ignition key

WARNING: Remove the ignition key before you
do servicing on the product.
1. Turn the ignition key in the engine START/STOP
switch to the "0" position.
2. Pull out the ignition key from the engine START/
STOP switch.
3. Install the ignition key in opposite sequence.

4.4 To remove and install the battery

WARNING: Remove the battery before you do
servicing on the product.
1. Open the battery door.
2. Disconnect the batteries cables (A).
a) Remove the cover from the positive (+) terminal
on the battery.
b) Disconnect the black battery cable (-) from the
terminal.
c) Disconnect the red battery cable (+) from the
terminal.
3. Remove the straps (B) that holds the battery in
position.
4. Install the battery in opposite sequence.
1331 - 001 -
A
B
Prepare and do servicing on the product - 7