YASKAWA GA500 Series Programming page 438

2.11 o: Keypad-Related Settings
0 : Copy Select
1 : Backup (drive → keypad)
The parameter setting values are read from the drive and saved in the keypad.
2 : Restore (keypad → drive)
Copies the parameter setting values saved in the keypad to a different drive.
3 : Verify (check for mismatch)
Makes sure that the parameter setting values in the drive agree with the parameters saved in the keypad.
4 : Erase (backup data of keypad)
Deletes the parameter setting values saved in the keypad.
■
o3-02: Copy Allowed Selection
No.
Name
(Hex.)
o3-02 Copy Allowed Selection
(0516)
Note:
When you select [Parameter Backup] on the keypad menu screen to do the backup function, the drive automatically sets o3-02 = 1.
0 : Disabled
1 : Enabled
■
o3-04: Select Backup/Restore Location
No.
Name
(Hex.)
o3-04 Select Backup/Restore
Location
(0B3E)
You can use the LCD keypad to make a maximum of 4 parameter backup sets.
0 : Memory Location 1
1 : Memory Location 2
2 : Memory Location 3
3 : Memory Location 4
■
o3-05: Select Items to Backup/Restore
No.
Name
(Hex.)
o3-05 Select Items to Backup/
Restore
(0BDA)
0 : Standard Parameters
1 : Standard + DWEZ Parameters
Note:
• Parameters qx-xx [DriveWorksEZ Parameters] and rx-xx [DriveWorksEZ Connections] show when A1-07 = 1 or 2 [DriveWorksEZ
Function Selection = DWEZ Enabled or Enabled/Disabled wDigital Input].
• The password for DriveWorksEZ PC software is necessary to back up qx-xx and rx-xx. If you enter an incorrect password, the drive detects
PWEr [DWEZ Password Mismatch].
438
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the copy function when o3-01 = 1 [Copy Keypad Function Selection = Backup (drive →
keypad)].
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the storage location for drive parameters when you back up and restore parameters. This
parameter is only available when using an LCD keypad.
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets which parameters are backed up, restored, and referenced. This parameter is only available when
using an LCD keypad.
Description
Description
Description
YASKAWA TOEPYAIGA5002A GA500 Programming
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0 - 3)
Default
(Range)
1
(0, 1)