Turnstone TS395-04 Quick Start Manual

TS395-04/05/06/07
Installed arm kits may be specified as a
factory option. If you have ordered arms
with these chair models, the installation
steps are simple: slide the arms into the
channels on the bottom of the chair seat
and tighten the knob.
©
2001 Steelcase Inc.
Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
1.
Insert the shafts of the casters
into their corresponding sockets
of the base . Push in firmly.
Stand the base upright.
3.

Assemble cylinder cover

Slide cylinder (A) up through cylinder
(B) (see fig 1). With cylinder (A) en-
gaged with cylinder (B), slide cylinder
(C) down over cylinders (A and B)
(see fig 2). Refer to fig. 3 for completed
assembly.
fig. 3
fig. 1
fig. 2
C
B
A
A
B
2.

Insert cylinder into base

With base resting on floor, insert
cylinder as shown.
4.
Place cover over the
cylinder in base.
A
B
C
A
B
C
Page 1 of 2
TS39504567 Rev B
R