Description Of Components; Controls Description - ARIETE Cafe Roma De Luxe Instructions Manual

ARIETE coffee makers are for those who know how to enjoy the pleasures of life, beginning with a good
cup of coffee. The innovative Thermocream® device gives you hot and rich coffee shop espresso, right
at home. In fact, Thermocream® is designed with a filter that ensures coffee brewing at constant pres-
sure.
In this manner it is possible to enjoy very creamy coffee with an intense aroma and full-bodied flavour,
without the necessity of pressing energetically, and by using whatever type of blend as long as it is not
too fine.
Ariete coffee makers also satisfy cappuccino lovers as they have a MAXI CAPPUCCINO attachment that
allows you to obtain, in a few seconds, a rich and dense froth in less than ten seconds. Furthermore,
the coffee is ready instantly with Ariete makers as they have an auto-priming system which allows a cup
of coffee to be made immediately, even if the maker has not been used for a long time or after filling the
water tank.
Enjoy your coffee with Café Roma Deluxe Ariete!

DESCRIPTION OF COMPONENTS

A - Machine body
B - Lock button of the coffee grinding regulator
C - Tank cover
D - Coffee beans tank, grinding regulator
E - Boiler temperature gauge (°C and °F)
F - Water/steam lever
G - Accessories box
H - Water tank (capacity 1,5 lt MAX level)
I - Tank filler flap
L - Control panel
M - Continuous flow device of ground coffee
N - Dispenser with ground coffee measure
O - MAXI-CAPPUCCINO attachment and stylus for water and steam supply
P - Press
Q - Water collection tray
R - Coffee powder collection tray
S - Cup grille
T - Professional filter holder
U - Thermocream® Filter
V - Silicon Ring
W - Thermocream® Disc

CONTROLS DESCRIPTION

1 On/off light
2 Coffee temperature light
3 Steam temperature light
4 Dispenser filler light
5 On/off button
6 Coffee brewing button
7 Steam button
8 Dispenser filler device button
- Remove the water tank (H) from the opening on the machine, fill with fresh natural water up to the Max mark
(1.5 lt.), and refit it into its housing onto the body. In order to guarantee the correct operation of the appliance,
push the tank down as far as it will go, Fig. 5. The tank may also be filled from the top, by pouring water through
SET UP

EN