Electrical Connection; Prior To Using The Machine - Kernau KDI 4853 Instruction Manual

EN
42

Electrical connection

• The earthed plug of your machine should be connected to an earthed outlet supplied
by suitable voltage and current. If there is no earthing installation, have a competent
electrician carry out an earthing installation. In case of usage without earthing instal-
led, our company will not be responsible for any loss that might occur.
• The indoor fuse current value should be 10-16 A.
• This machine accepts 220-240 V electricity. If your mains voltage is 110 V, connect
a step-up voltage converter capable of delivering 3000 W in between.
• Running in low voltage will cause a decline in washing quality.
• The machine's electrical cable should be replaced by an authorised service or an
authorised electrician only. Failure to do so may lead to accidents.
• For safety purposes, always make sure to disconnect the plug when a wash program-
me is finished.
• In order not to cause an electric shock, do not unplug when your hands are wet.
• When disconnecting your machine from the mains supply, always pull from the plug.
Never pull the cord itself.
Prior to using the machine for the first time
• Check whether the electricity and supply water specifications match the values indi-
cated by the installation instructions for the machine.
• Remove all packaging materials inside the machine.
• Set the water softener.
• Add 1 kg salt into the salt compartment and fill with water up to a level at which it
will almost overflow.
• Fill the rinse aid compartment.