Switching On The Machine And Selecting A Programme; Switching On The Machine; Programme Follow-Up; Changing A Programme - Kernau KDI 4853 Instruction Manual

Machine is energized when the On/Off button
is pressed , two dashes appear in the program
displa2y and the end of program indicator turns
on.
1. Press the Power On/Off key.
2. Select the program suiting your dishes via the Program Selection button.
3. If you prefer or wish to prefer , you can choose additional function.
4. Close door.The program starts automatically.
Note:
If you decide not to start to machine after selecting the program , just press the on/off
button.Your machine will become ready for the new program selection when you press on/
off button again.You can select the new program by pressing the program selection button.
Do not open the door before the program
ends.
Open the door and select a new program by
pressing the program selection button.
Note:
When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.

Switching on the machine

When you select a program with the program
selection button,the program you select (
P1,P2,etc )appears on the program display and
the end of program indicator turns off.
Program follow-up
End of program indicator on the control panel
turns on when the selected washing program is
completed .Your machine also gives a buzzer
sound for "5 times" when the program is com-
pleted.

Changing a programme

After closing the door , the new program started
will resume the course of the old program.
EN
54