Electrical Connection - Kernau KDI 6542 User Manual

IMPORTANT:
Items will not wash properly if a drain hose longer than 4 m is used.

ELECTRICAL CONNECTION

• Your machine is set operates at 220-240 V. If the mains voltage supply to your machine is 110 V,
connect a transformer of 110/220 V and 3000 W between the electrical connection.
• The earthed plug of the machine must be connected to an earthed outlet supplied by suitable voltage
and current.
• In the absence of earthing installation, an authorised electrician should carry out an earthing installation.
In the case of use without earthing installed, we will not be responsible for any loss of use that may
occur.
• The indoor fuse current value should be 10-16 A.
• Always use the plug provided with the device.
• Operating the device at low voltage will result in deterioration of the washing quality.
• The power cord of the device should only be replaced by an authorized service center or an authorized
electrician. Failure to do so may lead to accidents.
• For safety reasons, always pull the plug out of the socket after the washing program.
• Due to the risk of electric shock, do not pull the plug out of the socket with wet hands.
• Always pull the plug when disconnecting the device from the power supply. Never pull the cable itself.
EN
37