Pci Configuration - Asus DSBF-D Series Manual

Cache A000 - AFFF / Cache B000 - BFFF / Cache C800 - CBFF /
Cache CC00 - CFFF / Cache D000 - D3FF / Cache D400 - D7FF /
Cache D800 - DBFF / Cache DC00 - DFFF / Cache E000 - E3FF /
Cache E400 - E7FF / Cache E800 - EBFF/ Cache EC00 - EFFF
Refer to the configuration options information below:
Disabled - This block is not cached.
USWC Caching - Uncached Speculative Write Combined
Write Through - Writes are cached and sent to main memory at once.
Write Protect - Writes are ignored.
Write Back - Writes are cached, but not sent to memory until
necessary.
4.4.3 4.4.3

PCI Configuration

PCI Configuration
4.4.3 4.4.3 4.4.3 PCI Configuration PCI Configuration PCI Configuration
This menu shows the PCI configuration settings. Select an item then press
<Enter> to display the configuration options.
Advanced
Reset Configuration Data
Plug & Play OS
Palette Snooping
Option ROM Placement
F1:Help
ESC: Exit
Reset Configuration Data [No] Reset Configuration Data [No] Reset Configuration Data [No]
Reset Configuration Data [No] Reset Configuration Data [No]
This item allows you to clear the Extended System Configuration Data
(ESCD) area. Configuration options: [No] [Yes]
Plug And Play O/S [No] Plug And Play O/S [No] Plug And Play O/S [No] Plug And Play O/S [No] Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
4 - 2 2 4 - 2 2
4 - 2 2 4 - 2 2 4 - 2 2
PhoenixBIOS Setup Utility
PCI Configuration
↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ : Select Item
→←: Select Menu →← →←
→← →← Enter: Select Sub-menu
[No]
[No]
[Disabled]
[Disabled]
-/+: Change Value
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
Item Specific Help
Select 'Yes' if you want
to clear the Extended
System Configuration Data
(ESCD) area.
F9: Setup Defaults
F10: Save and Exit