Power On Configuration - Asus DSBF-D Series Manual

4.4.7 4.4.7 4.4.7 4.4.7 4.4.7

Power On Configuration

Power On Configuration Power On Configuration Power On Configuration Power On Configuration
This menu shows the power configuration settings. Select an item then
press <Enter> to display the configuration options.
Advanced
Power On Configuration
Restore on AC Power Loss
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Power On By PME#
Power-On By RTC Alarm
↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ : Select Item
F1:Help
→← →←
→←: Select Menu →← →←
ESC: Exit
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into "off state" after an AC
power interruption. When set to [Power On], the system turns on
automatically after a power interruption. When set to [Last State], the
system goes into whatever was the system state (on or off) before the
power interruption. Configuration options: [Power Off] [Power On]
[Last State]
Power Up By PS/2 Keyboard [Disabled] Power Up By PS/2 Keyboard [Disabled] Power Up By PS/2 Keyboard [Disabled] Power Up By PS/2 Keyboard [Disabled] Power Up By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the PS/2 keyboard to turn on the
system. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power Up By PS/2 Mouse [Disabled] Power Up By PS/2 Mouse [Disabled]
Power Up By PS/2 Mouse [Disabled] Power Up By PS/2 Mouse [Disabled] Power Up By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By PME# [Disabled] Power On By PME# [Disabled]
Power On By PME# [Disabled] Power On By PME# [Disabled] Power On By PME# [Disabled]
Allows you to enable or disable the PME and onboard LAN to generate a
wake-up event. Configuration options: [Disabled] [Enabled]
A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s
A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s
PhoenixBIOS Setup Utility
[Last State]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
-/+: Change Value
Enter: Select Sub-menu
Item Specific Help
Configures the system
state after recovering
from power failure.
F9: Setup Defaults
F10: Save and Exit
4 - 2 7 4 - 2 7
4 - 2 7 4 - 2 7 4 - 2 7