Creating A Raid 10 Set (Stripe + Mirror) - Asus DSBF-D Series Manual

5.3.3 5.3.3 5.3.3

Creating a RAID 10 set (Stripe + Mirror)

Creating a RAID 10 set (Stripe + Mirror) Creating a RAID 10 set (Stripe + Mirror)
5.3.3 5.3.3 Creating a RAID 10 set (Stripe + Mirror) Creating a RAID 10 set (Stripe + Mirror)
To create a RAID 10 set:
1. From the utility main menu, select 1 . C r e a t e R A I D V o l u m e
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ ]-Select
2. Enter a name for the RAID 10 set, then press <Enter>.
3. Highlight R A I D L e v e l R A I D L e v e l, press the up/down arrow key to select R A I D L e v e l R A I D L e v e l
R A I D L e v e l
|R A I D 1 0 ( R A I D 0 + 1 ) R A I D 1 0 ( R A I D 0 + 1 ) R A I D 1 0 ( R A I D 0 + 1 ), then press <Enter>. R A I D 1 0 ( R A I D 0 + 1 )
R A I D 1 0 ( R A I D 0 + 1 )
4. Follow steps 4 to 9 of section "5.3.1 Creating a RAID 0 set (striped)"
to create the RAID 10 set.
A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s
A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s
[ CREATE ARRAY MENU
Name: Volume1
RAID Level: RAID10(RAID0+1)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0
Create Volume
[ DISK/VOLUME INFORMATION
cannot contain special characters.
[ESC]-Exit
1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e, then
]
GB
]
[ENTER]-Select Menu
5 - 3 5 5 - 3 5
5 - 3 5 5 - 3 5 5 - 3 5