Graphics Configuration; Pci Express Configuration - Asus J6412T-IM-A Manual

C states
[Disabled]
[Enabled]
Enhanced C-states
[Disabled]
[Enabled]
Power Limit 1 Override
[Disabled]
[Enabled]
The following item appears only when you set the previous item to [Enabled].
Power Limit 1
This item allows you to provide rapid protection when the package power
exceeds Power Limit 1. Use <+> and <-> to adjust the value.
Power Limit 2 Override
[Disabled]
[Enabled]
The following item appears only when you set the previous item to [Enabled].
Power Limit 2
This item allows you to provide rapid protection when the package power
exceeds Power Limit 2. Use <+> and <-> to adjust the value.
3.3.4

Graphics Configuration

RC6(Render Standby)
Allows you to enable to disable render standby support. RC6 should be enabled if
S0ix is enabled. Configuration options: [Disabled] [Enabled]
3.3.5

PCI Express Configuration

PCIE_x1 Slot
PCIE_x1 Slot
This item allows you to control the PCI Express root port.
Configuration options: [Disabled] [Enabled]
ASPM
This item allows you to control the Active State Power Management on
both NB (NorthBridge) side and SB (SouthBridge) side of the DMI Link.
Configuration options: [Disable] [L0s] [L1] [L0sL1] [Auto]
3-4
Disables the CPU C states.
Enables the CPU C states.
Disables enhanced C1E state.
Enables enhanced C1E state.
Disables power limit 1 override.
Enables power limit 1 override.
Disables power limit 2 override.
Enables power limit 2 override.
J6412T-IM-A