Table of Contents
Advertisement
M.2_1 Configuration: [Auto][SATA mode][PCIE mode]
[Auto]
Auto-detects the M.2 device mode. If a SATA device is detected,
SATA6G_1 will be disabled.
[SATA mode]
Only supports M.2 SATA devices. Please note that SATA6G_1 port cannot
be used in this mode.
[PCIE mode]
Only supports M.2 PCIE devices.
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [Disabled] [Enabled]
RGB LED lighting
When system is in working state
This item allows you to turn on or turn off the RGB LED lighting when the system in working
state. Configuration options: [On] [Off]
When system is in sleep, hibernate or soft off state
[On]
LEDs will light up in S3 (sleep), S4 (hibernat) and S5 (soft off) states.
[Off]
LEDs will not light up in S3 (sleep), S4 (hibernat) and S5 (soft off) states.
3.6.8
APM Configuration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
3.6.9
PCI Subsystem Configuration
The items in this menu allow you to configure SR-IOV support.
3.6.10
USB Configuration
The items in this menu allow you to change the USB-related features.
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Port Disable Override
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
3.6.11
Network Stack Configuration
The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.
ROG STRIX B360-I GAMING
3-15
Hide quick links:
Advertisement
Table of Contents
